Nehari函数族的偏差性质与拟共形延拓

研究某一Nehari函数族的偏差性质,得到这类函数族的H?lder连续性及若干偏差定理,同时讨论了该函数类的拟共形延拓问题,并给出拟共形延拓的复伸张估计,推广了杨宗信等人相应的结论.     

石墨烯纳米网电导特性的能带机理：第一原理计算

通过第一原理电子结构计算来研究有序多孔纳米网的电导特性变化的能带机理.能带结构分析结果表明:石墨烯纳米网超晶格(3m,3n)(m和n为整数)的电子本征态在布里渊区中心点发生四重简并;碳空位孔洞规则排列形成的石墨烯纳米网具有由简并态分裂形成的宽度可调带隙,无论石墨烯的两个子晶格是否对等.在具有磁性网孔阵列的石墨烯纳米网中,反铁磁耦合使对称子晶格的反演对称性增加了一项量子限制条件,导致能带结构在K点的二重简并态分裂成带隙.通过控制网孔密度能够有效调节石墨烯纳米网的带隙宽度,为实现新一代石墨烯纳米电子器件提供了理论依据.     

Ultrasound-assisted immersion freezing reduces the structure and gel property deterioration of myofibrillar protein from chicken breast

The effects of air freezing (AF), immersion freezing (IF) and ultrasound-assisted immersion freezing (UF) at different power levels (125, 165, 205 and 245 W) on the structure and gel properties of the myofibrillar protein (MP) of chicken breast were investigated. UF at 165 W (UF-165) had no obvious negative impact on the primary structure of the MP and effectively reduced the change in the secondary and tertiary structure. In addition, UF-165 significantly reduced the losses in the elastic modulus (G′), gel strength, and gel water holding capacity (P < 0.05). According to low field nuclear magnetic resonance analysis, the T₂₁ and T₂₂ of the UF-165 MP gels were shorter than those of the AF and IF samples, which meant that the UF-165 reduced the mobility of the immobilized water and free water in MP gel. A scanning electron microscopy analysis showed that the appropriate ultrasonic power promoted the formation of a compact and homogeneous protein gel network. These results suggested that the appropriate ultrasonic power maintained the MP structure and reduced the loss of gel quality.     

Ultrasonic stimulation of the brain to enhance the release of dopamine – A potential novel treatment for Parkinson’s disease

Parkinson’s disease (PD) is characterized by the decrease of dopamine (DA) production and release in the substantia nigra and striatum regions of the brain. Transcranial ultrasound has been exploited recently for neuromodulation of the brain in a number of fields. We have stimulated DA release in PC12 cells using low-intensity continuous ultrasound (0.1 W/cm² − 0.3 W/cm², 1 MHz), 12 h after exposure at 0.2 W/cm², 40 s, the amount of DA content eventually increased 78.5% (p = 0.004). After 10-day ultrasonic treatment (0.3 W/cm², 5 min/d), the DA content in the striatum of PD mice model restored to 81.07% of the control (vs 43.42% in the untreated PD mice model). In addition to this the locomotion activity was restored to the normal level after treatment. We suggest that the low intensity ultrasound-induced DA release can be attributed to a combination of neuron regeneration and improved membrane permeability produced by the mechanical force of ultrasound. Our study indicates that the application of transcranial ultrasound applied below FDA limits, could provide a candidate for relatively safe and noninvasive PD therapy through an amplification of DA levels and the stimulation of dopaminergic neuron regeneration without contrast agents.     

新郑西亚斯东周玉器材料属性与加工工艺的科技分析

中国玉文化源远流长，治玉工艺经过各个时代的不断发展和完善，在一定程度上能反映古代社会生产力发展水平及文化、贸易、技术交流等信息。利用能量色散型X射线荧光光谱（EDXRF）、激光拉曼光谱（LRS）、超景深光学显微系统（OM）等分析技术，结合硅胶覆膜微痕复制技术，对河南省新郑西亚斯东周墓地出土的一批玉器进行科技分析。首先利用化学成分和物相结构分析技术确定了玉器材质的矿物属性，其次利用显微分析技术表征了玉器表面及穿孔内部和印模的加工痕迹，特别是阴刻纹饰和穿孔微痕特征，最后探讨了玉器样品的材料属性和加工工艺两者之间的联系。化学成分和物相结构分析结果表明，所分析的西亚斯东周玉器材质丰富，主要矿物组成有滑石、透闪石、水晶、云母等。玉器表面纹饰微痕特征分析表明，所分析玉器阴刻工艺采用了两种加工工具，分别是砣具和手持硬质工具。穿孔微痕分析特征表明，钻孔包括单面钻孔和双面/多面钻孔两种方式，钻孔工艺则有实心钻、管钻等。部分玉器钻孔形状和内部微痕特征表明，尽管均采用了实心钻工艺，但所采用的实心钻头在形状上存在差异，同时，也存在是否配合解玉砂进行钻孔的差异。不同材料属性的玉器采用了不同的加工工艺。滑石质玉器，莫氏硬度1，器型主要为玉片饰，其表面阴刻纹饰主要采用手持硬质工具进行刻画，钻孔主要采用了双面钻孔方式，并使用了实心钻头未添加解玉砂进行加工，钻头形状可能为圆锥状；云母质玉器，莫氏硬度2~3，器型主要为玉玦片饰，纹饰采用了砣具添加解玉砂的加工工艺，钻孔方式为单面钻孔，采用了管钻工艺。透闪石型玉器，莫氏硬度5~6，器型主要为玉片饰，表面纹饰采用砣具配合解玉砂砣刻，以双面钻孔的方式为主，钻孔工艺为实心钻头配合解玉砂工艺，钻头形状与滑石类样品一致，为圆锥状。水晶质玉器，莫氏硬度7，均为珠饰，表面无纹饰，钻孔方式为双面/多面钻孔，钻孔工艺为实心钻配合解玉砂工艺，且钻头可能为圆柱形。研究结果表明，玉器表面纹饰所采用的阴刻工艺和钻孔工艺，与玉器本身的材料属性、器型等存在密切关系。     

O-Alkyldithiophosphate Nickel Complexes with dcpf Ligand as Efficient Electrocatalysts for Hydrogen Evolution

Six new O-alkyldithiophosphate nickel complexes with dcpf ligand, [(dcpf)Ni(S₂P{O}OR)] (dcpf = 1,1′-bis (dicyclohexylphosphino)ferrocene, R = CH₃ ( 1 ), CH₃CH₂ ( 2 ), Ph ( 3 ), 4-MeC₆H₄ ( 4 ), PhCH₂ ( 5 ) and PhCH₂CH₂ ( 6 )), have been synthesized by the treatment of dcpf with ((RO)₂PS₂)₂Ni in satisfactory yields. These complexes were characterized by elemental analysis, spectroscopy (FTIR, UV–vis, ¹H, ¹³C, and ³¹P NMR), thermogravimetric analysis and single crystal X-ray diffraction. The nickel atom in 1 , 2 ·CH₂Cl₂, 3 ·CH₂Cl₂, 4 ·2CH₂Cl₂·THF, and 2( 5 )·hexane adopts a slightly distorted square-planar coordination environment finished by two phosphorus atoms of dcpf ligand and two sulfur atoms of O-alkyldithiophosphate ligand. Furthermore, the electrochemical properties for complexes 1 – 6 were also investigated by cyclic voltammetry. With the addition of 120 mM trifluoroacetic acid (TFA), the turnover frequency (TOF) values for 1 – 6 are estimated to be 1243.83, 1046.54, 1331.71, 2545.29, 1899.03, and 1191.37 s⁻¹, with the overpotential (η) values of 0.62, 0.58, 0.71, 0.67, 0.60, and 0.56 V, respectively. The result of electrochemical studies indicates that all complexes can be used as efficient molecular eletrocatalysts for the reduction of protons to hydrogen in the presence of TFA in MeCN.     

Chirality and Magnetic Properties of One-dimensional Ln (Ln = Gd,Dy) Polymers

The usage of the achiral ligand, in lanthanide chemistry, successfully obtained two series of chiral lanthanide complexes, formulated d - and l -{Gd[IN][HIN][CH₂OCH₂O]}_n (abbreviated as Gd ) and d - and l -{Dy[IN][HIN][CH₂OCH₂O]}_n (abbreviated as Dy , HIN = isonicotinic acid). Crystallographic researches determined that four compounds are all one-dimensional (1D) chain structures and crystallized in a chiral space group. In addition, CH₂OHCH₂OH acts as not only solvent but also the bridge ligand. Besides, single crystal circular dichroism (CD) spectra conformed compounds Gd-_L and Gd-_D , Dy-_L and Dy-_D are enantiomers respectively. Magnetically, compound Gd showed predominant magnetocaloric effect (MCE) of 26.20 J · kg^–1 · K^–1 at 2.5 K for ΔH = 7 T, while there is ferromagnetic interactions in compound Dy .     

Various solution methods,accompanied by dynamic investigation,for the same problem as a means for enriching the mathematical toolbox

A geometrical task is presented with multiple solutions using different methods, in order to show the connection between various branches of mathematics and to highlight the importance of providing the students with an extensive ‘mathematical toolbox’. Investigation of the property that appears in the task was carried out using a computerized tool.     

Thermal,mechanical and morphological properties of multicomponent blends based on acrylic and styrenic polymers

Multicomponent polymer blends afford polymeric materials with specific properties for many applications. The effect of different chemical structures on the miscibility and compatibility of polymer blends composed of multicomponent acrylic and styrenic polymers was studied in this research. The influence of each component on the thermal, mechanical, and morphological properties, as well as optical transparency, was analyzed in poly (methyl methacrylate), homopolymer (PMMAh), or copolymer (PMMAe) blends where the minority constituents formed by polystyrene (PS), styrene-acrylonitrile copolymer (SAN) or acrylonitrile-butadiene-styrene terpolymer (ABS). The results showed significant changes in the properties of these mixtures due to the effect of the type of chemical structure and different elastomeric domains of the majority and minority components of polymer blends.